Command Reference Guide

20 ● debugging pim dm 3Com Router 5000 Family and Router 6000 Family
Command Reference
debugging pim dm
Purpose Use the debugging pim dm command to enable PIM-DM debugging functions.
Use the undo debugging pim dm command to disable the debugging functions.
Syntax debugging pim dm { alert | all | mrt | timer | warning | { recv | send
} { all | assert | graft | graft-ack | join | prune } }
undo debugging pim dm { alert | all | mrt | timer | warning | { recv |
send } { all | assert | graft | graft-ack | join | prune } }
Parameters all
All the debugging information of PIM-DM.
alert
Debugging information of PIM-DM interoperation
event.
mrt
Debugging information of PIM-DM multicast routing
table.
timer
Debugging information of PIM-DM timer.
warning
Debugging information of PIM-DM warning message.
recv
Debugging information of PIM-DM receiving packets.
send
Debugging information of PIM-DM sending packets.
all
All packet types.
assert
Packet type, assert packet.
graft
Packet type, graft packet.
graft-ack
Packet type, graft acknowledgment packet.
join
Packet type, join packet.
prune
Packet type, prune packet.
Default By default, PIM-DM debugging functions are disabled.
Example Enable all PIM-DM debugging functions
<3Com> debugging pim dm all
View This command can be used in the following views:
■ User view