Command Reference Guide

8 ● cache-sa-enable 3Com Router 5000 Family and Router 6000 Family
Command Reference
cache-sa-enable
Purpose Use the cache-sa-enable command to enable the router to cache SA state.
Use the undo cache-sa-enable command to remove the cache from the router.
Syntax cache-sa-enable
undo cache-sa-enable
Parameters None
Default By default, the router caches the SA state, tht is, (S, G) entry after it receives SA
messages.
Example Configure the router to cache all the SA states.
<3Com> system-view
[3Com] msdp
[3Com-msdp] cache-sa-enable
View This command can be used in the following views:
■ MSDP view
Description If the router is in cache state, it will not send SA request message to the specified
MSDP peer when it receives a new group join message.