Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
171172173174175176177178179180
3Com Router 5000 Family and Router 6000 Family display sftp source-ip ● 133
Command Reference
display sftp source-ip
Purpose Use the display sftp source-ip command to display the source IP address
configured for the SFTP client.
Syntax display sftp source-ip
Parameters None
Example Display the current source IP address of the SFTP client.
<Router> display sftp source-ip
The source IP specified is 0.0.0.0
View This command can be used in the following views:
■ Any view
Description If a source interface has been specified for the SFTP client, the IP address of the
interface is displayed. If neither source interface nor source IP address has been
specified for the SFTP client, 0.0.0.0 is displayed.