Command Reference Guide

3Com Router 5000 Family and Router 6000 Family timer-lsp-refresh ● 297
Command Reference
timer-lsp-refresh
Purpose Use the timer lsp-refresh command to configure the refresh interval of LSP.
Use the undo timer lsp-refresh command to restore the default value.
Syntax timer lsp-refresh seconds
undo timer lsp-refresh
Parameters seconds
Specifies the LSP refresh interval ( in seconds). Valid
values are 1 to 65535.
If no value is specified, the default value is 900
seconds.
Example Set the LSP refresh interval of the current system to 1500 seconds.
[3Com -isis] timer lsp-refresh 1500
View This command can be used in the following views:
■ IS-IS view
Description By this mechanism, synchronization of the LSPs within the entire area can be
maintained.
Related Command timer lsp-max-age