Command Reference Guide

296 ● timer keep-alive hold 3Com Router 5000 Family and Router 6000 Family
Command Reference
timer keep-alive hold
Purpose Use the timer keep-alive hold command to configure the Keepalive and
Holdtime timer of BGP.
Use the undo timer keep-alive hold command to restore the default values
of the Keepalive and Holdtime timers.
Syntax timer keep-alive keepalive-interval hold holdtime-interval
undo timer
Parameters keepalive-interval
Interval for sending Keepalive message, ranging from 0
to 65535. By default, its value is 60 seconds.
holdtime-interval
Keepalive time of BGP, ranging from 0 to 65535. By
default, its value is 180 seconds.
Example Configure the Keep-alive and Hold-time timers as 30 seconds and 60 seconds,
respectively.
[3Com -bgp] timer keep-alive 30 hold 60
View This command can be used in the following views:
■ BGP Unicast view
■ BGP Multicast view
■ VPNv4 view
■ VPN Instance view