Command Reference Guide

292 ● stub 3Com Router 5000 Family and Router 6000 Family
Command Reference
stub
Purpose Use the stub command to configure the type of an OSPF area as the STUB area.
Use the undo stub command to cancel the settings.
Syntax stub [ no-summary ]
undo stub
Parameters no-summary
Only available for the ABR in Stub area. When this
parameter is selected, the ABR only advertises the
Summary-LSA for the default route, but no other
Summary-LSAs. The area is also called totally stub area.
Default By default, no area is set to be the STUB area.
Example Set the type of OSPF area 1 to the STUB area.
[3Com -ospf] area 1
[3Com -ospf-area-0.0.0.1] stub
View This command can be used in the following views:
■ OSPF Area view
Description All the routers in a Stub area must be configured with the corresponding attribute.
Related Command ■ default cost
■ default-cost