Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
1731173217331734173517361737173817391740
3Com Router 5000 Family and Router 6000 Family silent-interface ● 285
Command Reference
silent-interface
Purpose Use the silent-interface command to disable a specified interface to transmit
IS-IS packet.
Use the undo silent-interface command to enable the interface to transmit
IS-IS packet.
Syntax silent-interface interface-type interface-number
undo silent-interface interface-type interface-number
Parameters interface-type
Specifies the interface type.
interface-number
Specifies the interface number.
Default By default, all the interface are allowed to transmit/receive IS-IS packets.
Example Prohibit the IS-IS packets to be transmitted via Interface Ethernet1/0/0.
[3Com -isis] silent-interface Ethernet1/0/0[3Com -isis]
silent-interface Ethernet1/0/0
View This command can be used in the following views:
■ IS-IS view
Description The silent-interface command is only used to restrain the IS-IS packets not to
be sent on the interface, but the interface routes still can be sent from other
interfaces.