Command Reference Guide

278 ● rip work 3Com Router 5000 Family and Router 6000 Family
Command Reference
rip work
Purpose Use the rip work command to enable the running of RIP on an interface.
Use the undo rip work command to disable the running of RIP on an interface.
Syntax rip work
undo rip work
Parameters None
Default By default, RIP is run on an interface.
Example Disable the interface serial1/0/0 to run the RIP.
[3Com ] interface serial1/0/0
[3Com -serial1/0/0] undo rip work
View This command can be used in the following views:
■ Interface view
Description This command is used in cooperation with rip input, rip output and network
commands.
Related Commands ■ network
■ rip input
■ rip output