Command Reference Guide

274 ● rip output 3Com Router 5000 Family and Router 6000 Family
Command Reference
rip output
Purpose Use the rip output command to configure an interface to transmit RIP packets to
the external.
Use the undo rip output command to cancel an interface to transmit RIP packets
to the external.
Syntax rip output
undo rip output
Parameters None
Default By default, RIP packets at all interfaces (except loopback interface) can be transmitted.
Example Disable the interface serial1/0/0 to transmit RIP packets.
[3Com ] interface serial1/0/0
[3Com -serial1/0/0] undo rip output
View This command can be used in the following views:
■ Interface view
Description This command is used in cooperation with the other two commands: rip input
and rip work.Functionally, rip work is equivalent to rip input & rip
output. The latter two control the receipt and the transmission of RIP packets
respectively on an interface. The former command equals the functional combination
of the latter two commands.
Related Commands ■ rip input
■ rip work