Command Reference Guide

272 ● rip metricin 3Com Router 5000 Family and Router 6000 Family
Command Reference
rip metricin
Purpose Use the rip metricin command to configure the additional route metric added to
the route when an interface receives RIP packets.
Use the undo rip metricin command to restore the default value of this
additional route metric.
Syntax rip metricin value
undo rip metricin
Parameters value
Additional route metric added when receiving a
packet. Valid values are 0 to 16.
If no value is specified, the default value is 0.
Example Specify the additional route metric to 2 when the interface serial1/0/0 receives RIP
packets.
[3Com ] interface serial1/0/0
[3Com -serial1/0/0] rip metricin 2
View This command can be used in the following views:
■ Interface view
Description This command is valid for the routes distributed by the local network and other routes
redistributed by other routes. This command is invalid for the routes redistributed by
the local router.
Related Command rip metricout