Command Reference Guide

3Com Router 5000 Family and Router 6000 Family rip input ● 271
Command Reference
rip input
Purpose Use the rip input command to allow an interface to receive RIP packets.
Use the undo rip input command to cancel an interface to receive RIP packets.
Syntax rip input
undo rip input
Parameters None
Default By default, RIP packets at all interfaces (except loopback interface) can be received..
Example Specify the interface serial1/0/0 not to receive RIP packets.
[3Com -serial1/0/0] undo rip input
View This command can be used in the following views:
■ Interface view
Description This command is used in cooperation with the other two commands: rip output
and rip work.Functionally, rip work is equivalent to rip input & rip
output. The latter two control the receipt and the transmission of RIP packets
respectively on an interface. The former command equals the functional combination
of the latter two commands.
Related Commands ■ rip output
■ rip work