Command Reference Guide

268 ● rip 3Com Router 5000 Family and Router 6000 Family
Command Reference
rip
Purpose Use the rip command to enable the RIP and enter the RIP view.
Use the undo rip command to cancel RIP.
Syntax rip
undo rip
Parameters None
Default By default, the system does not run RIP.
Example Enable the RIP and enter the RIP view.
[3Com ] rip
[3Com -rip]
View This command can be used in the following views:
■ System view
Description To enter the RIP view to configure various RIP global parameters, RIP should be
enabled first. Whereas the configuration of parameters related to the interfaces is not
restricted by enabling/disabling RIP.
CAUTION: You can execute the undo rip command in both system view and
interface view, which will lead to deletion of all RIP-related commands.