Command Reference Guide

3Com Router 5000 Family and Router 6000 Family reset ospf ● 267
Command Reference
reset ospf
Purpose Use the reset ospf all command to reset all the OSPF processes. Use the
parameter of statistics to reset statistics about OSPF.
Use the reset ospf command to reset the OSPF process, the following results are
expected:
Syntax reset ospf [ statistics ] { all | process-id }
Parameters statistics
Resets statistics of the OSPF process.
process-id
OSPF process number. If no OSPF process number is
specified, all the OSPF processes should be reset.
all
Resets all the OSPF processes.
Example Reset all the OSPF processes
<3Com > reset ospf all
Reset the OSPF process 200
<3Com > reset ospf 200
View This command can be used in the following views:
■ User view
Description The reset ospf process-id command can be used to reset the specified process and
clear statistics data. Use the parameter of statistics to reset statistics about OSPF.
■ Clear invalid LSA immediately without waiting for LSA timeout.
■ If the Router ID changes, a new Router ID will take effect by executing the
command.
■ Re-elect DR and BDR conveniently.
■ OSPF configuration will not be lost if the system is restarted.
■ Delete the original OSPF routes.
■ After OSPF process is restarted, new routes and LSA will be generated
correspondingly and LSA will be advertised.
The system will require the user to confirm whether to re-enable the OSPF protocol
after execution of the command.