Command Reference Guide

266 ● reset loadsharing 3Com Router 5000 Family and Router 6000 Family
Command Reference
reset loadsharing
Purpose Use the reset loadsharing command to reset statistics about unbalanced load
sharing for all interfaces or the interfaces related to the equal-cost routes to the
specified destination network.
Syntax reset loadsharing { all | ip address ip-address mask }
Parameters all
Clears the statistics about unbalanced load sharing for
all interfaces.
ip-address mask
IP address and mask of destination network. The
specified mask takes the dotted decimal format or the
form of length.
Example Clear the statistics about unbalanced load sharing
<Router> reset loadsharing all
View This command can be used in the following views:
■ User view