Command Reference Guide

3Com Router 5000 Family and Router 6000 Family reset ip routing-table ● 263
Command Reference
reset ip routing-table
Purpose Use the reset ip routing-table command to clear the routing table.
Syntax reset ip routing-table [ vpn-instance vpn-instance-name ] statistics
protocol protocol-type
Parameters vpn-instance vpn-instance
name
Specifies the name of the VPN-instance.
protocol protocol-type
Specifies the protocol type, including all, BGP, direct
connection route, ISIS, OSPF, OSPF ASE, OSPF NSSA,
RIP, and static route.
Example Remove the routing information of the private network whose VPN-instance name is
3Com 1.
[Router] reset ip routing-table vpn-instance 3Com 1
Routing tables:
Proto route active added deleted
DIRECT 2 2 0 0
STATIC 1 1 0 0
BGP 0 0 0 0
RIP 0 0 0 0
IS-IS 0 0 0 0
OSPF 0 0 0 0
O_ASE 0 0 0 0
O_NSSA 0 0 0 0
AGGRE 0 0 0 0
Total 3 3 0 0
View This command can be used in the following views:
■ User view
Description When you specify the vpn-instance, the numbers of added and deleted routes of the
specified protocol are set to zero.