Command Reference Guide

3Com Router 5000 Family and Router 6000 Family reset bgp ● 259
Command Reference
reset bgp
Purpose Use the reset bgp peer-address command to reset the connection of BGP with
a specified peer.
Use the reset bgp all command to reset all the BGP connections.
Syntax reset bgp { all | peer-address } [ vpn-instance vpn-instance-name ]
Parameters all
Resets all the BGP connections.
peer-address
Resets only the connection with the specified BGP
peer.
vpn-instance
vpn-instance-name
Name of specified VPN-INSTANCE. Valid values are 1 to
19.
Example Reset all the BGP connections to enable the new configuration (after configuring new
Keepalive and Holdtime intervals using the
timer command).
<3Com > reset bgp all
View This command can be used in the following views:
■ User view
Description After changing the BGP policy or protocol configuration, resetting BGP connections
can make the newly configured policy in effect immediately.