Command Reference Guide

3Com Router 5000 Family and Router 6000 Family peer shutdown ● 249
Command Reference
peer shutdown
Purpose Use the peer shutdown command to disable the specified BGP peer or peer group
to initiate or receive BGP connection or to disconnect a BGP connection that has
existed.
Use the undo peer shutdown command to restore the default, allowing the
peer/peer group to intiate or receive BGP connection.
Syntax peer { group-name | peer-address } shutdown
undo peer {group-name | peer-address } shutdown
Parameters group-name
Specifies the name of the peer group.
peer-address
Specifies the IP address of the peer.
Example Disable the BGP peer 1.1.1.1 to initiate or receive BGP connection.
[Router-bgp] peer 1.1.1.1 shutdown
View This command can be used in the following views:
■ BGP view
■ VPN Instance view