Command Reference Guide

248 ● peer route-update-interval 3Com Router 5000 Family and Router 6000 Family
Command Reference
peer route-update-interval
Purpose Use the peer route-update-interval command to configure the interval for a
peer group to advertise route updates.
Use the undo peer route-update-interval command to restore the default
value.
Syntax peer group-name route-update-interval seconds
undo peer group-name route-update-interval
Parameters group-name
Specifies the name of the peer group.
seconds
Specifies the minimum interval of sending UPDATE
message (in seconds). Valid values are 0 to 600.
If no value is specified, the default interval is 5 seconds
for internal peer groups, and 30 seconds for external
peer groups.
Example Configure BGP peer group test to advertise route updates at intervals of 10 seconds.
[3Com -bgp] peer test as-number 100
[3Com -bgp] peer test route-update-interval 10
View This command can be used in the following views:
■ BGP view
■ VPNv4 view
■ VPN Instance view