Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display rmon statistics ● 127
Command Reference
display rmon statistics
Purpose Use the display rmon statistics command to display the RMON statistics
about the specified or all interfaces.
Syntax display rmon statistics [interface-type interface-number ]
Parameters interface-type
interface-number
Interface type and number.
Example Display the RMON statistics about interface Ethernet 2/0/1.
<3Com> display rmon statistics ethernet2/0/1
Statistics entry 1 owned by monitor is VALID.
Interface : Ethernet0/0/0<ifIndex.642>
etherStatsOctets : 9760 , etherStatsPkts : 79
etherStatsBroadcastPkts : 0 , etherStatsMulticastPkts : 0
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 0 , 65-127 : 0 , 128-255 : 0
256-511: 0 , 512-1023: 0 , 1024-1518: 0
View This command can be used in the following views:
■ Any view
Description The displayed information includes: number of collisions, CRC and queues, oversize
packets and undersize packets, timeout, fragments, broadcast, multicast, unicast, and
bandwidth use.
Related Command rmon statistics