Command Reference Guide

236 ● peer ebgp-max-hop 3Com Router 5000 Family and Router 6000 Family
Command Reference
peer ebgp-max-hop
Purpose Use the peer ebgp-max-hop command to allow establishing EBGP connection
with a neighbor on an indirectly connected network.
Use the undo peer ebgp-max-hop command to cancel the existing
configuration.
Syntax peer group-name ebgp-max-hop [ ttl ]
undo peer group-name ebgp-max-hop
Parameters group-name
Specifies the name of the peer group.
ttl
Specifies the maximum hop count. The range is 1 to
255. By default, the value is 64.
Default By default, this feature is disabled.
Example Allow to establish EBGP connection with peer group "test" on an indirectly
connected network.
[3Com -bgp] peer test ebgp-max-hop
View This command can be used in the following views:
■ BGP view