Command Reference Guide

234 ● peer default-route-advertise 3Com Router 5000 Family and Router 6000 Family
Command Reference
peer default-route-advertise
Purpose Use the peer default-route-advertise command to redistribute a default
route to a peer group.
Use the undo peer default-route-advertise command to cancel the
existing configuration.
Syntax peer group-name default-route-advertise
undo peer group-name default-route-advertise
Parameters group-name
Specifies the name of the peer group.
Default For this command, no default route is required in the routing table. A default route is
sent unconditionally to a peer with the next hop being itself.
Default By default, no default route is redistributed to a peer group
Example Redistribute a default route to peer group "test".
[3Com -bgp] peer test as-number 100
[3Com -bgp] peer test default-route-advertise
View. This command can be used in the following views:
■ BGP view