Command Reference Guide

230 ● peer allow-as-loop 3Com Router 5000 Family and Router 6000 Family
Command Reference
peer allow-as-loop
Purpose Use the peer allow-as-loop command to configure the repeating times of the
local AS number.
Use the undo peer allow-as-loop command to cancel the configuration.
Syntax peer { group-name | peer-address } allow-as-loop [ number ]
undo peer { group-name | peer-address } allow-as-loop
Parameters group-name
Specifies the name of the peer group.
peer-address
Specifies the IP address of the peer.
number
Specifies the repeating times of the local AS number.
Valid values are 1 to 10.
Example Configure the repeating times of the local AS number to 2.
[3Com -bgp] peer 1.1.1.1 allow-as-loop 2
View This command can be used in the following views:
■ BGP view
■ VPNv4 view
■ VPN Instance view
Related Commands ■ display current-configuration
■ display bgp routing peer { advertised | received }
■ display bgp routing group