Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
1671167216731674167516761677167816791680
3Com Router 5000 Family and Router 6000 Family ospf dr-priority ● 217
Command Reference
ospf dr-priority
Purpose Use the ospf dr-priority command to configure the priority for electing the
"designated router" on an interface.
Use the undo ospf dr-priority command to restore the default value.
Syntax ospf dr-priority value
undo ospf dr-priority
Parameters value
Interface priority for electing the "designated
router."Valid values are 0 to 255.
If no values is specified, the default value is 1.
Example Set the priority of the interface Ethernet1/0/0 to 8, when electing the DR.
[3Com ] interface Ethernet1/0/0
[3Com -Ethernet1/0/0] ospf dr-priority 8
View This command can be used in the following views:
■ Interface view
Description Interface priority determines the interface qualification when electing the
“designated router”. The interface with high priority is considered first when there is
collision in election.