Command Reference Guide

212 ● opaque-capability 3Com Router 5000 Family and Router 6000 Family
Command Reference
opaque-capability
Purpose Use the opaque-capability enable command to enable the Opaque capability
of OSPF.
Use the undo opaque-capability command to disable the Opaque capability of
OSPF.
Syntax opaque-capability enable
undo opaque-capability
Parameters None
Example Enable Opaque capability.
[3Com -ospf-100] opaque-capability enable
View This command can be used in the following views:
■ OSPF view
Description CAUTION:
■ By default, Opaque capability of OSPF is enabled.
■ If the application based on Opaque LSA is enabled, for example, the area TE
capability is enabled, the Opaque capability cannot be disabled.