Command Reference Guide

204 ● memory auto-establish enable 3Com Router 5000 Family and Router 6000 Family
Command Reference
memory auto-establish enable
Purpose Use the memory auto-establish enable command to resume connections of
all the routing protocols when the idle memory of the router recovers to a safety
value.
Use the
memory auto-establish disable command to disable the above
function. Use the
memory auto-establish enable command to enable the
above function again. By default, the function is always enabled.
Syntax memory auto-establish enable
Parameters None
Default By default, when the idle memory of the router recovers to a safety value,
connections of all the routing protocols will always recover (when the idle memory of
the router reduces to a lower limit, the connection will be disconnected forcibly).
Example Enable memory resume of the current router and recover connections of all the
protocols automatically.
[3Com ] memory auto-establish enable
[3Com ]
%3/13/2003 15:48:2-RM-5-S1-RTLOG:You have changed the model of
connection
View This command can be used in the following views:
■ System view
Related Commands ■ memory auto-establish disable
■ memory
■ display memory