Command Reference Guide

3Com Router 5000 Family and Router 6000 Family memory auto-establish disable ● 203
Command Reference
memory auto-establish disable
Purpose Use the memory auto-establish disable command to disable the function of
restoring the connections of all the routing protocols (even if the idle memory reduces
to a safety value).
Use the
memory auto-establish disable command to disable the above
function.
Syntax memory auto-establish disable
Parameters None
Default By default, when the idle memory of the router recovers to a safety value,
connections of all the routing protocols will always recover (when the idle memory of
the router reduces to a lower limit, the connection will be disconnected forcibly).
Example Disable to recover the connections of all the protocols automatically when the current
router memory resumes.
[3Com ] memory auto-establish disable
[3Com ]
%3/13/2003 15:47:2-RM-5-S1-RTLOG:You have changed the model of
connection
View This command can be used in the following views:
■ System view
Description Use the memory auto-establish disable command to disable the above
function. Thus, connections of all the routing protocols will not recover when the idle
memory of the router recovers to a safety value. In this case, you need to restart the
routing protocol to recover the connections.
You shall use the command cautiously.
Related Commands ■ memory auto-establish enable
■ memory { safety | limit }
■ display memory limit