Command Reference Guide

3Com Router 5000 Family and Router 6000 Family log-peer-change ● 197
Command Reference
log-peer-change
Purpose Use the log-peer-change command to turn on the BGP adjacency changes
output switch.
Use the undo log-peer-change command to turn off the BGP adjacency
changes output switch.
Syntax log-peer-change
undo log-peer-change
Parameters None
Default By default, BGP adjacency changes output switch is turned off.
Example Turn on the BGP adjacency changes output switch on the current router.
[3Com -bgp] log-peer-change
View This command can be used in the following views:
■ BGP view
Description After the BGP adjacency changes output switch is turned on, BGP adjacency changes
will be output to the configuration terminal until the switch is turned off.