Command Reference Guide

196 ● loadbandwidth 3Com Router 5000 Family and Router 6000 Family
Command Reference
loadbandwidth
Purpose Use the loadbandwidth command to allocate load bandwidth to the interface.
Use the undo loadbandwidth to restore the default load bandwidth of the
interface, that is, the physical bandwidth.
Syntax loadbandwidth bandwidth
undo loadbandwidth
Parameters bandwidth
Load bandwidth (in kbps) on the current interface.
Valid values are 0 to 1,000,000.
Example Configure the bandwidth for load sharing on interface Ethernet 0/0/0.
[3Com -Ethernet0/0/0] loadbandwidth 1000
[3Com -Ethernet0/0/0] undo loadbandwidth
View This command can be used in the following views:
■ Interface (Excluding Logical Interfaces) view
Description Different from physical bandwidth, the configuration of load bandwidth does not
affect interface properties but load distribution. When you set the bandwidth
argument to 0, the current interface is shut down and do not participate in load
sharing.