Command Reference Guide

122 ● display rmon event 3Com Router 5000 Family and Router 6000 Family
Command Reference
display rmon event
Purpose Use the display rmon event command to display the event table of RMON or
the specified event entry.
Syntax display rmon event [ event-entry ]
Parameters event-entry
Event index.
Example Display the event table of RMON.
<3Com> display rmon event
Event table 1 owned by null is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days
00h:02m:27s.
View This command can be used in the following views:
■ Any view
Description The displayed information includes: event index, event owner, event description,
action triggered by the event (log or trap), and last time the event occurred (the
elapsed time since system initialization/startup in centiseconds.
Related Command rmon event
Table 25 Description on the fields of the display rmon event command
Field Description
Event table 1 Event index 1
VALID The event entry corresponding to the index is valid
cause log-trap when triggered The event causes log-and-trap notification when triggered
last triggered at 0days
00h:02m:27s
Last time the event was triggered