Command Reference Guide

3Com Router 5000 Family and Router 6000 Family isis timer retransmit ● 195
Command Reference
isis timer retransmit
Purpose Use the isis timer retransmit command to configure the LSP retransmission
interval over the point-to-point link.
Use the undo isis timer retransmit command to restore the default setting.
Syntax isis timer retransmit seconds
undo isis timer retransmit
Parameters seconds
Specifies the retransmission interval of LSP packets,
with the range from 0 to 300 and the default value is 5
seconds.
Example Set the LSP retransmission interval to 10 seconds on Interface serial1/0/0.
[3Com ] interface serial1/0/0
[3Com -Serial1/0/0] isis timer retransmit 10
View This command can be used in the following views:
■ Interface view
Description Use this parameter cautiously when setting this parameter to avoid unnecessary
retransmission.
The response is required when sending LSP packets on the p2p link, not the broadcast
link, and therefore this command is unnecessary for the broadcast link.
Related Command isis timer lsp