Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display rmon alarm ● 121
Command Reference
display rmon alarm
Purpose Use the display rmon alarm command to display the alarm table of remote
monitoring (RMON) or the specified alarm entry.
Syntax display rmon alarm [ alarm-entry ]
Parameters alarm-entry
Alarm index.
Example Display the alarm table of RMON.
<3Com> display rmon alarm
Alarm table 1 owned by HUAWEI is VALID.
Samples absolute value : 1.3.6.1.2.1.16.1.1.1.4.1
<etherStatsOctets.1>
Sampling interval : 10(sec)
Rising threshold : 1000(linked with event 1)
Falling threshold : 100(linked with event 1)
When startup enables : risingOrFallingAlarm
Latest value : 0
View This command can be used in the following views:
■ Any view
Related Command rmon alarm
Table 24 Description on the fields of the display rmon alarm command
Field Description
Alarm table 1 Alarm index 1
HUAWEI Owner
Samples absolute value The sample type of the 1.3.6.1.2.1.16.1.1.1.4.1 node is absolute
VALID The alarm entry corresponding to the index is valid
Sampling interval Sampling interval
Rising threshold is 1000 Rising threshold is 1000
Falling threshold is 100 Falling threshold is 100
When startup enables:
risingOrFallingAlarm
Type of the first alarm, which can be rising alarm, falling alarm, or
both