Command Reference Guide

178 ● ipv4-family vpn-instance 3Com Router 5000 Family and Router 6000 Family
Command Reference
ipv4-family vpn-instance
Purpose Use the ipv4-family command to enter MBGP address family view of RIP.
Use the undo ipv4-family command to cancel all configurations in extended
address family view.
Syntax ipv4-family [ unicast ] vpn-instance vpn-instance-name
undo ipv4-family [ unicast ] vpn-instance vpn-instance-name
Parameters unicast
Unicast address.
vpn-instance-name
Associates the specified VPN instance with the IPv4
address family. Enter the MBGP address family view of
RIP with this parameter.
Example Enter the RIP MBGP address family view.
[3Com ] ip vpn-instance xhy
[3Com -vpn-xhy] route-distinguisher 100:1
[3Com -rip] ipv4-family vpn xhy
[3Com-rip-af-vpn-instance]
View This command can be used in the following views:
■ RIP view
Description ipv4-family command is used to enter the MBGP address family view. In this view,
parameters related to address family can be configured for RIP.
undo ipv4-family command is only used in RIP view.
The ipv4-family vpn-instance command is used for BGP/MPLS VPN. For
related description, refer to “MPLS VPN“ section in module “MPLS” chapter of this
manual.
Related Command display rip vpn-instance