Command Reference Guide

162 ● import-route 3Com Router 5000 Family and Router 6000 Family
Command Reference
import-route
Purpose Use the import-route command to redistribute routes from other protocols.
Use the undo import-route command to disable the configuration.
Syntax import-route protocol [ med med-value ] [ route-policy
route-policy-name ]
undo import-route protocol
Parameters protocol
Specifies the routing protocol from which to
redistribute routes, it can be direct, ospf, ospf-nssa ,
ospf-ase, rip, bgp, and static at present.
med med-value
Specifies the MED value to be applied to redistributed
routes, ranging from 0 to 4294967295.
route-policy
route-policy-name
Specifies the route-policy for filtering redistributed
routes. It can be an alphanumeric string with the
length ranging from 1 to 19.
Default By default, BGP does not redistribute the routes from other protocols.
Example Redistribute routes from RIP.
[3Com -bgp] import-route rip
View This command can be used in the following views:
■ BGP view