Command Reference Guide

132 ● display route-policy 3Com Router 5000 Family and Router 6000 Family
Command Reference
display route-policy
Purpose Use the display route-policy command to view the configured route-policy
Syntax display route-policy [ route-policy-name ]
Parameters route-policy-name
Specifies displayed route-policy name.
Example Display the information of route-policy named policy1.
<3Com > display route-policy policy1
Route-policy : policy1
Permit 10 : if-match (prefixlist) p1
apply cost 100
matched : 0 denied : 0
View This command can be used in the following views:
■ Any view
Description Display all the configured route-policy when no route-policy-name is specified.
Related Command route-policy