Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display rip interface ● 129
Command Reference
display rip interface
Purpose Use the display rip interface command to display information about the
specified RIP interface or all RIP interface.
Syntax display rip interface [ vpn-instance vpn-instance-name ]
Parameters vpn-instance
vpn-instance-name
Specifies a VPN by its name.
Example Display information about all RIP interfaces.
<3Com > display rip interface
RIP Interface: public net
Address Interface Pro MetrIn/Out Input Output
Split-horizon
30.0.0.2 Mp-group1 RIP1 0/1 on on on
View This command can be used in the following views:
■ Any view
Table 31 Description on the fields of the display rip interface command
Field Description
Address IP address of the RIP interface. You must enable the RIP interface using the
network in RIP view
Interface Name of the RIP interface. Its IP address is displayed in the Address field
Pro RIP version running on the interface
MetrIn/Out The routing metric value added when receiving or sending routes
Input On indicates that the interface can receive RIP packets and off indicates the
contrary.
Output On indicates that the interface can send RIP packets and off indicates the
contrary.
Split-horizon On indictes that slit horizon is enabled and off indicates that slit horizion is
disabled