Command Reference Guide

128 ● display rip 3Com Router 5000 Family and Router 6000 Family
Command Reference
display rip
Purpose Use the display rip command to view the current RIP running state and its
configuration information.
Syntax display rip
Parameters None
Example Display the current running state and configuration information of the RIP protocol.
<3Com > display rip
RIP is turned on
public net VPN-Instance
Checkzero is on Default cost : 1
Summary is on Preference : 100
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
No peer router
View This command can be used in the following views:
■ Any view
Table 30 Description of the output information of the display rip command
Field Description
RIP is turned on RIP is enabled.
public net VPN-Instance Public networks in the VPN-instance
Checkzero is on Enables checkzero of RIP.
Default cost : 1 The default cost of the redistributed route is 1.
Summary is on ■ Enables route summary of RIP.
Preference : 100 The preference of RIP is 100.
Period update timer : 30
Timeout timer : 180
Garbage-collection
timer : 120
Setting on the three timers of RIP
No peer router RIP has no peer router.