Command Reference Guide

126 ● display ospf routing 3Com Router 5000 Family and Router 6000 Family
Command Reference
display ospf routing
Purpose Use the display ospf routing command to view the information about OSPF
routing table.
Syntax display ospf [ process-id ] routing
Parameters process-id
OSPF process ID. If no process ID is specified, the
command takes effect on all OSPF processes.
Example View the routing table information related to OSPF.
<3Com > display ospf routing
OSPF Process 1 with Router ID 1.1.1.1
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
10.110.0.0/16 1 Net 10.110.10.1 1.1.1.1 0
10.10.0.0/16 1 Stub 10.10.0.1 3.3.3.3 0
Total Nets: 2
Intra Area: 2 Inter Area: 0 ASE: 0 NSSA: 0
View This command can be used in the following views:
■ Any view
Table 28 Description on the fields of the display ospf routing command
Field Description
Destination Destination network segment
Cost Route cost
Type Type of the route
NextHop Next hop address
AdvRouter Router ID of the router advertising the route
Area Area ID
Intra Area Number of intra-area routes
Inter Area Number of inter-area routes
ASE Number of external routes
NSSA Number of NSSA routes