Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display ospf retrans-queue ● 125
Command Reference
display ospf retrans-queue
Purpose Use the display ospf retrans-queue command to view the information
about the OSPF retransmission queue.
Syntax display ospf [ process-id ] retrans-queue
Parameters process-id
OSPF process ID. If no process ID is specified, the
command takes effect on all OSPF processes.
Example View the information about the OSPF retransmission queue.
<3Com > display ospf retrans-queue
OSPF Process 200 with Router ID 103.160.1.1
Retransmit List
The Router’s Neighbors is
RouterID: 162.162.162.162 Address: 103.169.2.2
Interface: 103.169.2.5 Area: 0.0.0.1
Retrans list:
Type: ASE LSID:129.11.77.0 AdvRouter:103.160.1.1
Type: ASE LSID:129.11.108.0 AdvRouter:103.160.1.1
View This command can be used in the following views:
■ Any view
Table 27 Description on the fields of the display ospf retrans-queue command
Field Description
RouterID Router ID of the neighbor router
Address Address of the interface, through which the neighbor router communicates
with this router
Interface Address of the interface attached to the network segment
Area OSPF area ID
Type Type of the LSA
LSID Link state ID of the LSA
AdvRouter Router ID of the router originating the LSA