Command Reference Guide

124 ● display ospf request-queue 3Com Router 5000 Family and Router 6000 Family
Command Reference
display ospf request-queue
Purpose Use the display ospf request-queue command to view the information
about the OSPF request-queue.
Syntax display ospf [ process-id ] request-queue
Parameters process-id
OSPF process ID. If no process ID is specified, the
command takes effect on all OSPF processes.
Example View the information about the OSPF request-queue.
<3Com > display ospf request-queue
The Router’s Neighbors is
RouterID: 103.160.1.1 Address: 103.169.2.5
Interface: 103.169.2.2 Area: 0.0.0.1
LSID:129.11.25.0 AdvRouter:103.160.1.1 Sequence:80000001
Age:201
LSID:129.11.25.0 AdvRouter:103.160.1.1 Sequence:80000001
Age:201
LSID:129.11.25.0 AdvRouter:103.160.1.1 Sequence:80000001
Age:201 The Router’s Neighbors is
RouterID: 1.1.1.1 Address: 1.1.1.1
Interface: 1.1.1.3 Area: 0.0.0.0
LSID:1.1.1.3 AdvRouter:1.1.1.3 Sequence:80000017 Age:35
View This command can be used in the following views:
■ Any view
Table 26 Description on the fields of the display ospf request-queue command
Field Description
RouterID Router ID of the neighbor router
Address Address of the interface, through which the neighbor router
communicate with this router
Interface Address of the interface attached to the network segment
Area OSPF area ID
LSID:1.1.1.3 Link state ID of the LSA
AdvRouter Router ID of the router originating the LSA
Sequence Sequence number of the LSA, used for discovering old and
duplicated LSAs
Age Age of the LSA