Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display ospf peer ● 121
Command Reference
display ospf peer
Purpose Use the display ospf peer command to view the information about the
neighbors in OSPF areas.
Use the display ospf peer brief command to view the brief information of
neighbors in OSPF, mainly the neighbor number at all states in every area.
Syntax display ospf [ process-id ] peer [ brief ]
Parameters process-id
OSPF process ID. If no process ID is specified, the
command takes effect on all OSPF processes.
brief
Brief information of neighbors in areas.
Example Display information about OSPF neighbors.
<3Com > display ospf peer
OSPF Process 1 with Router ID 1.1.1.1
Neighbors
Area 0.0.0.0 interface 10.153.17.88’s neighbor(s)
RouterID: 2.2.2.2 Address: 10.153.17.89
State: Full Mode: Nbr is Master Priority: 1
DR: 10.153.17.89 BDR: 10.153.17.88
Dead timer expires in 31s
Neighbor has been up for 01:14:14
Display brief information about OSPF neighbors.
<3Com > display ospf peer brief
OSPF Process 1 with Router ID 1.1.1.1
Neighbor Statistics
Area ID Down Attempt Init 2-Way ExStart Exchange Loading Full
Total
0.0.0.0 0 0 0 0 0 0 0 1 1
0.0.0.1 0 0 0 0 0 0 0 1 1
Total 0 0 0 0 0 0 0 2 2