Command Reference Guide

120 ● display ospf nexthop 3Com Router 5000 Family and Router 6000 Family
Command Reference
display ospf nexthop
Purpose Use the display ospf nexthop command to view the information about the
next-hop
Syntax display ospf [ process-id ] nexthop
Parameters process-id
OSPF process ID. If no process ID is specified, the
command takes effect on all OSPF processes.
Example Display the OSPF next-hop information.
<3Com > display ospf nexthop
OSPF Process 1 with Router ID 2.2.2.2
Next hops:
Address Type Refcount Intf Addr Intf Name
----------------------------------------------------------------------
10.0.0.2 Direct 3 10.0.0.2 Ethernet0/0/1
10.1.1.1 Neighbor 6 10.0.0.2 Ethernet0/0/1
60.0.0.1 Direct 3 60.0.0.1 Dialer0
80.0.0.1 Direct 3 80.0.0.1 Dialer1
90.0.0.1 Direct 3 90.0.0.1 Dialer3
View This command can be used in the following views:
■ Any view
Table 23 Description on the fields of the display ospf nexthop command
Field Description
Address Next hop address
Type Type of the next hop
Refcount Reference count of the next hop, that is, the number of the routes
using this address as the next hop
Intf Addr The IP address of the outgoing interface to the next hop
Intf Name The outgoing interface to the next hop