Command Reference Guide

106 ● display ospf asbr-summary 3Com Router 5000 Family and Router 6000 Family
Command Reference
display ospf asbr-summary
Purpose Use the display ospf asbr-summary command to view summary about the
redistributed routes of OSPF.
Syntax display ospf [ process-id ] asbr-summary [ ip-address mask ]
Parameters process-id
OSPF process ID. If no process ID is specified, the
command takes effect on all OSPF processes.
ip-address
Matched IP address, in dotted decimal notation.
mask
IP address mask in dotted decimal notation.
Example Display the summary information of all OSPF redistributed routes.
<3Com > display ospf asbr-summary
The Count of Route is 0 OSPF Process 1 with Router ID 1.1.1.1
Summary Addresses
Total summary address count: 2
Summary Address
net : 168.10.0.0
mask : 255.254.0.0
tag : 1
status : Advertise
The Count of Route is 0
Summary Address
net : 1.1.0.0
mask : 255.255.0.0
tag : 100
status : DoNotAdvertise
The Count of Route is 0
View This command can be used in the following views:
■ Any view
Table 16 Description on the fields of the display ospf asbr-summary command
Field Description
net Destination segment
mask Mask
tag Tag
status State information. Two values are available:
DoNotAdvertise: The summary route destined to this network segment
is not to be advertised.
Advertise: The summary route destined to this network segment is to
be advertised.