Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display ospf abr-asbr ● 105
Command Reference
display ospf abr-asbr
Purpose Use the display ospf abr-asbr command to view information on the routes to
the Area Border Router (ABR) and Autonomous System Border Router (ASBR) of OSPF.
Syntax display ospf [ process-id ] abr-asbr
Parameters process-id
OSPF process ID. If no process ID is specified, the
command takes effect on all OSPF processes.
Example Display the information of the OSPF ABR and ASBR.
<3Com > display ospf abr-asbr
OSPF Process 1 with Router ID 1.1.1.1
Routing Table to ABR and ASBR
I = Intra i = Inter A = ASBR B = ABR S = SumASBR
Destination Area Cost Nexthop Interface
IA 2.2.2.2 0.0.0.0 10 10.153.17.89 ethernet0/0/0
View This command can be used in the following views:
■ Any view
Table 15 Description on the fields of the display ospf abr-asbr command
Field Description
Destination Router ID of ABR or ASBR
Area The area to which both this router and the ABR or the ASBR is
connected
Cost Route cost
Nexthop Next hop address
Interface Output interface of this router