Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display memory ● 103
Command Reference
display memory
Purpose Use the display memory command to view the memory setting and state
information related to the routing capacity.
Syntax display memory [ limit ]
Parameters limit
Displays the lower limit and safety value of the router
idle memory.
Example Display the current memory setting and state information.
<3Com > display memory limit
Current memory limit configuration information:
system memory safety: 30 (MBytes)
system memory limit: 20 (MBytes)
memory auto-establish enabled
Free Memory: 73855332 (Byte)
The state information about connection:
The times of disconnect: 0
The times of reconnect: 0
The current state: Normal
The information displayed by this command includes the router memory
limit, the size of the idle memory, the times of connection
disconnecting, the times of connection reestablishment and the current
state.
The displayed information is described specifically in the following table:
Table 14 Description of the information displayed by the display memory limit
command
Field Description
memory safety: 30 The safety value of the router memory is 30Mbytes.
memory limit: 20 The lower limit of the router memory is 20Mbytes.
memory auto-establish
enabled
The system allows recovering the connection automatically. (If the
automatic recover is disabled, the "auto-establish disabled" will be
displayed.)
Free Memory: 73855332
(Byte)
The size of the current idle memory is 73855332 bytes, that is,
73.855M.
The times of disconnect:
0
The times of the connection disconnecting of the router is 0.
The times of reconnect: 0 The times of the connection re-establishment of the router is 0.
The current state: Normal The current state is normal. (If entering the emergent state, the system
will display "Exigency" .)