Command Reference Guide

100 ● display isis routing 3Com Router 5000 Family and Router 6000 Family
Command Reference
display isis routing
Purpose Use the display isis routing command to view IS-IS routing information
Syntax display isis routing
Parameters None
Example View the output information of display isis routing command.
<3Com > display isis routing
ISIS Level - 1 Forwarding Table :
Type - D -Direct, C -Connected, I -ISIS, S -Static, O -OSPF
B -BGP, R -RIP
Flags: R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Destination/Mask In.Met Ex.Met NextHop Interface
Flags
----------------------------------------------------------------------
------
D 4.0.0.0/8 10 NULL Direct Ethernet2/0/0
R/L/-
I 55.55.0.0/16 20 NULL 4.0.0.2 Ethernet2/0/0
R/L/-
3.0.0.2 Ethernet1/0/0
I 0.0.0.0/0 10 NULL 4.0.0.2 Ethernet2/0/0
R/-/-
3.0.0.2 Ethernet1/0/0
ISIS Level - 2 Forwarding Table :
Type - D -Direct, C -Connected, I -ISIS, S -Static, O -OSPF
B -BGP, R -RIP
Flags: R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Destination/Mask In.Met Ex.Met NextHop Interface
Flags
----------------------------------------------------------------------
------
D 4.0.0.0/8 10 NULL Direct Ethernet2/0/0
R/L/-
D 99.99.0.0/16 10 NULL Direct LoopBack3
R/L/-
View This command can be used in the following views:
■ Any view