Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
1551155215531554155515561557155815591560
3Com Router 5000 Family and Router 6000 Family display isis peer ● 99
Command Reference
display isis peer
Purpose Use the display isis peer command to view IS-IS peer information.
Syntax display isis peer [ verbose ]
Parameters verbose
When this parameter is configured, the area address
carried in the Hello message from the peer will be
displayed. Otherwise, only the summary information
will be displayed.
Example Display the output information of the display isis peer command.
<3Com > display isis peer
System ID Interface Circuit ID State HoldTime Type
Pri
1111.1111.1031 Ethernet3/0/0 1111.1111.1031.01 Up 8s L2
64
1111.1111.1011 Ethernet3/0/1 1111.1111.1011.01 Up 7s L2
6
View This command can be used in the following views:
■ Any view
Description The display isis peer verbose command yields not only all the outputs of
the
display isis peer command, but also the area address, Up time and IP
address of the directly connected interface of the peer.