Command Reference Guide

96 ● display isis interface 3Com Router 5000 Family and Router 6000 Family
Command Reference
display isis interface
Purpose Use the display isis interface command to view the information of the IS-IS
enabled interface.
Syntax display isis interface [ verbose ]
Parameters verbose
If this parameter is used, the details of the interface
will be displayed.
Example Display the information about the IS-IS enabled interface.
<3Com > display isis interface
Interface IP Address Id Link.Sta IP.Sta MTU Type DIS
Ethernet1/0/0 2.1.1.12 001 Up Up 1497 L12 No/No
Display the details of the IS-IS enabled interface.
<3Com > display isis interface verbose
Interface IP Address Id Link.Sta IP.Sta MTU Type DIS
Ethernet1/0/0 2.1.1.12 001 Up Up 1497 L12 No/No
Secondary IP Address(es):
Csnp-Interval : L110L210
Hello-Interval: L110L210
Hold Time : L1 30 L2 30
Lsp Interval :1
Cost : L110L210
Priority : L164L264
Retransmit Interval:5
View This command can be used in the following views:
■ Any view
Description This command views the information of the IS-IS enabled interface, including
interface name, IP address, link state of the interface and so on. Besides displaying all
the information shown by the
display isis interface command, the
display isis interface verbose command displays such information about
the IS-IS parameters of the interface as CSNP packet broadcast interval, Hello
message broadcast interval and number of invalid Hello messages.