Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display ip routing-table statistics ● 91
Command Reference
display ip routing-table statistics
Purpose Use the display ip routing-table statistics command to view the
integrated routing information.
Syntax display ip routing-table [ vpn-instance vpn-instance-name ] statistics
Parameters vpn-instance
vpn-instance-name
Specifies the name of the VPN-instance.
Example Display the integrated routing information.
<3Com > display ip routing-table statistics
Routing tables:
Protorouteactiveaddeddeletedfreed
BGP 0 0 0 0 0
DIRECT 5 4 5 0 0
RIP 0 0 0 0 0
STATIC 0 0 0 0 0
IS-IS 0 0 0 0 0
OSPF 0 0 0 0 0
O_ASE 0 0 0 0 0
O_NSSA 0 0 0 0 0
Total 5 4 5 0 0
View This command can be used in the following views:
■ Any view
Description If you do not specify vpn-instance in the display ip routing-table
statistics command, the system displays the routing information of public
networks. If you specify vpn-instance, the system displays the routing information of
private networks.
The integrated routing information includes total route amount, the route amount
added or deleted by protocol, amount of the routes that are labeled deleted but not
deleted, the active route amount and inactive route amount.