Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display ip routing-table ip_address1 ip_address2 ● 85
Command Reference
display ip routing-table ip_address1
ip_address2
Purpose Use the display ip routing-table ip_address1 ip_address2 command
to view the routing information in the specified destination address range.
Syntax display ip routing-table ip_address1 mask1 ip_address2 mask2 [ verbose
]
Parameters ip_address1, ip_address2
Destination IP address in dotted decimal notation.
ip_address1 and ip_address2 determine one address
range together to display the route in this address
range.
mask1, mask2
IP address mask, length in dotted decimal notation or
integer form.
verbose
With the verbose parameter, this command displays
the verbose information of both the active and inactive
routes. Without the parameter, this command only
displays the summary of active routes.
Example View the routing information of destination addresses ranging from 1.1.1.0 to
2.2.2.0.
<3Com > display ip routing-table 1.1.1.0 24 2.2.2.0 24
Routing tables:
Summary count: 3
Destination/Mask Proto Pre Cost Nexthop Interface
1.1.1.0/24 DIRECT 0 0 1.1.1.1 Interface
serial1/0/0
1.1.1.1/32 DIRECT 0 0 127.0.0.1 InLoopBack0
2.2.2.0/24 DIRECT 0 0 2.2.2.1 Interface serial2/0/0
View This command can be used in the following views:
■ Any view