Command Reference Guide

84 ● display ip routing-table ip_address 3Com Router 5000 Family and Router 6000 Family
Command Reference
Protocol: #StaticPreference: 60
*NextHop: 2.1.1.1Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47Metric: 0/0
There are no corresponding routes in the natural mask range (only display the longest
matching route). View the detailed information.
<3Com > display ip routing-table 169.253.0.0 verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both* = Next hop in use
Summary count:1
**Destination: 169.0.0.0Mask: 255.0.0.0
Protocol: #StaticPreference: -60
*NextHop: 2.1.1.1
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47 Metric: 0/0
View This command can be used in the following views:
■ Any view
Description With different optional parameters, the output of the command is different. The
following is the output description for different forms of this command:
■ display ip routing-table ip_address
If destination address, ip_address, has corresponding routes in natural mask
range, this command will display all subnet routes. Or, only the route best matching
the destination address, ip_address, is displayed. And only the active matching
route is displayed.
■ display ip routing-table ip_address mask,
This command only displays the route fully matching with specified destination
address and mask.
■ display ip routing-table ip_address longer-match
This command displays all route destination addresses matching with destination
addresses in natural mask range.